Sunday, January 31, 2010

[papercreters] Re: Solar Design T-square and clam shaped reflectors

My last message did not go through. Anyway, I added an animated gif at the bottom of the link at solar cooking. It is to help explain the procedure. I WILL be improving the animation, but it is good enough for now.
(I lost my gif animation software so i had to relearn it in different programs). There has been interest from India, from a top amateur American scientist and in this group so I am pleased so far.
Remember, it is a new class of solar cookers. So dive in and be a pioneer.
Brian

--- In papercreters@yahoogroups.com, "Brian" <gaiatechnician@...> wrote:
>
> I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
> I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
> That worked like a charm.
> Would any of you be willing to try it.
> Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
> I think cob might be the best material to do a model.
> Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
> I will not have decent sun here till March. And frankly, the world needs this thing now.
>
> http://solarcooking.wikia.com/wiki/Solar_design_T-Square
> Brian White
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Cement & Concrete FAQs (Frequently Asked Questions) Portland Cement Association (PCA)

Hi everyone ,i would try a hydrolic press it will have a pressure gage on it ,we did this and it started squising apart at 1200 psi.
A compressed block done in our press let go at 1630psi hope this helps.
Clair

--- In papercreters@yahoogroups.com, "joelincalif" <joelincalif@...> wrote:
>
> I would think that uncompressed papercrete (the kind poured from a tow cart) would never be considered a solid (like concrete) because it would squish nearly flat long before it breaks. Maybe they would measure this squish.
>
> As for measuring the pressure - it's easy enough to put a pressure gage on the jack and know exactly what pressure is being applied.
>
> Joel
>
> --- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@> wrote:
> >
> >
> > Wonderful information. I clipped a couple of paragraphs that reminded me Slurryguy's attempts to test papercrete. What I'm wondering (and it's probably a very simpe thing) is how do you measure the psi? I can see putting a cylinder of cured papercrete into a jack or something and increasing pressure until it fails ..... but how do you measure how much pressure was applied?
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Saturday, January 30, 2010

[papercreters] Re: Solar Design T-square and clam shaped reflectors

In my case, I will be using cob, which is a mixture of straw, sand and clay. I will use that to make a mold, and I will use the mold as a form for a reflector.
A potential problem with the clam shaped reflectors is that they have to point at the sun (No problem there) and the clam shell has to line up with the sun's path. That part might be hard! It means putting it on an equatorial mount or adjusting it to point the same way as an equatorial mount. Perhaps easy, perhaps not.
Brian.

--- In papercreters@yahoogroups.com, Ron Richter <ronerichter@...> wrote:
>
>
>
> Why couldn't we use pc for the box part?
>
> Calle
>
> And for the part holding the mirrors. Thanks for a great science fair project Brian!
>
> Ron
>
>
>
> I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
> I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
> That worked like a charm.
> Would any of you be willing to try it.
> Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
> I think cob might be the best material to do a model.
> Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
> I will not have decent sun here till March. And frankly, the world needs this thing now.
>
> http://solarcooking.wikia.com/wiki/Solar_design_T-Square
> Brian White
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Solar Design T-square and clam shaped reflectors

Sorry for being so slow getting back. I thought I had animated gif software but I gave it away with an old scanner years ago. I ended up using an ancient microsoft animated gif software + the gimp "layers". I think the gimp works on its own but the old microsoft thing was useful for adjusting the timing.
(I just completed the first version a couple of hours ago. It will improve! and I will upload improved versions in the next couple of days). So lots of relearning, and searching for animated gif software!

On the link now, I have the animated gif at the end with the "procedure" for making a clay mold.
Basically you lay out the mirrors first. Adjusting them in sequence with the laser pointers. (You actually end up building up the secondary reflector at the same time as you build up the primary one) and you use the 2 lasers on each mirror in turn as you go.
Anyway, you probably need enough mirrors to do the secondary reflector part and still have enough mirrors for a couple of lines of the primary reflector.
When the entire reflector surface is made, you could take off the mirrors and smoothe off the surface. Then it can be used to make reflectors from corrugated plastic (cut to fit the shape), or fiberglass or whatever.
(I know it is a big project and I know it is a step into the unknown). A professor in India wants to know more too for an appropriate technology class that he teaches.
Anyway, thats it for now. Thanks for comments and if you do something, do not be afraid to add it to the solar cooking wiki. (There is a clam shell reflector page too).
Brian


--- In papercreters@yahoogroups.com, "Brian" <gaiatechnician@...> wrote:
>
> I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
> I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
> That worked like a charm.
> Would any of you be willing to try it.
> Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
> I think cob might be the best material to do a model.
> Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
> I will not have decent sun here till March. And frankly, the world needs this thing now.
>
> http://solarcooking.wikia.com/wiki/Solar_design_T-Square
> Brian White
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Friday, January 29, 2010

[papercreters] Hi Folks

I'm new here. My boyfriend and I, after much research and consideration, have decided to build our house out of papercrete. I'm sooo excited! We live in deep east Tx is anyone close to the Palestine, Nacogdoches, Jacksonville area building with papercrete? I'd be interested in seeing and even helping a bit with the process. Any tips or advice is greatly appreciated.

Shelia/ Rusk, Tx

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Resources needed for other Yahoo groups!



Hi, just found a lady that put us in touch with a great Solar cooking group after the post on the Clam Shell unit.
Is there a good Passive/solar group? Needing to find out how much solar power for different things to run. Books just don't cut it. Called a satelite internet company and they did not know.


Happy weekend, on to a source for shredded paper so am going to try a solar cooker with papercrete filler.

Thanks
Calle


From: "joelincalif" <joelincalif@aim.com>
Date: Fri, 29 Jan 2010 01:52:08 -0000
To: <papercreters@yahoogroups.com>
Subject: [papercreters] Re: A papercrete shed at my school

 

Hello Annalis,

Just for fun (under the aternative building materials theme) you should also try light weight concrete using perlite (the white foam stuff in your potting soil). It sorta looks like rice crispies treats when mixed up but is solid when dry. Here's an easy formula is use:
1 pound perlite and between 2 and 3 pounds cement (2 pounds cement is about the mimiminum). Perlite is pretty light so this will make about two lunch pails full of mix! I buy cheap 4 for $1 plastic trays at the dollar stores for these experments.

Add about 2 1/2 pound water to the cement then JUST mix in the perlite. Don't mix too much or you'll break up the perlite.

It may be fun in class to try the different formulas for papercrete you find on this site and have the class analyse the results for hardness, final weight, cost per pound, drying time, spreadability (can it be spread like plaster?) ...

Have fun, Joel

--- In papercreters@yahoogroups.com, "ANNALIS" <n2art25@...> wrote:
>
> I am sooo excited. I have been given the green light to build a shed using recycled materials at my school. It's a great way to introduce my students to the necesity of recycling and the use of alternative building materials. I can just see the beautiful sculptural possibilities on the surface. I also have access to all of the obselete textbooks which will more than be enough to make the PC blocks. I can start shredding paper and bagging then when weather gets better, we can start making blocks. I am probably looking at plastering when we return to school next year. I am hoping to move this into our community little by little. Can't wait!
>
> Annalis
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Thursday, January 28, 2010

[papercreters] Re: Cement & Concrete FAQs (Frequently Asked Questions) Portland Cement Association (PCA)

I would think that uncompressed papercrete (the kind poured from a tow cart) would never be considered a solid (like concrete) because it would squish nearly flat long before it breaks. Maybe they would measure this squish.

As for measuring the pressure - it's easy enough to put a pressure gage on the jack and know exactly what pressure is being applied.

Joel

--- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@...> wrote:
>
>
> Wonderful information. I clipped a couple of paragraphs that reminded me Slurryguy's attempts to test papercrete. What I'm wondering (and it's probably a very simpe thing) is how do you measure the psi? I can see putting a cylinder of cured papercrete into a jack or something and increasing pressure until it fails ..... but how do you measure how much pressure was applied?

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: A papercrete shed at my school

Hello Annalis,

Just for fun (under the aternative building materials theme) you should also try light weight concrete using perlite (the white foam stuff in your potting soil). It sorta looks like rice crispies treats when mixed up but is solid when dry. Here's an easy formula is use:
1 pound perlite and between 2 and 3 pounds cement (2 pounds cement is about the mimiminum). Perlite is pretty light so this will make about two lunch pails full of mix! I buy cheap 4 for $1 plastic trays at the dollar stores for these experments.

Add about 2 1/2 pound water to the cement then JUST mix in the perlite. Don't mix too much or you'll break up the perlite.

It may be fun in class to try the different formulas for papercrete you find on this site and have the class analyse the results for hardness, final weight, cost per pound, drying time, spreadability (can it be spread like plaster?) ...

Have fun, Joel

--- In papercreters@yahoogroups.com, "ANNALIS" <n2art25@...> wrote:
>
> I am sooo excited. I have been given the green light to build a shed using recycled materials at my school. It's a great way to introduce my students to the necesity of recycling and the use of alternative building materials. I can just see the beautiful sculptural possibilities on the surface. I also have access to all of the obselete textbooks which will more than be enough to make the PC blocks. I can start shredding paper and bagging then when weather gets better, we can start making blocks. I am probably looking at plastering when we return to school next year. I am hoping to move this into our community little by little. Can't wait!
>
> Annalis
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] 700 year old Iran Village

This Power Point is interesting, you can see it in the files section
listed as "700 Year Old Iran Village"

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] New file uploaded to papercreters

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the papercreters
group.

File : /700 year old Iran Village.ppt
Uploaded by : countryatheartok <criswells.ok@sbcglobal.net>
Description : 700 Year Old Iran Village

You can access this file at the URL:
http://groups.yahoo.com/group/papercreters/files/700%20year%20old%20Iran%20Village.ppt

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/forms/general.htmlfiles

Regards,

countryatheartok <criswells.ok@sbcglobal.net>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Monday, January 25, 2010

RE: [papercreters] Re: Hammer milled paper?



Hammer milled paper worked well for me when someone gave me some to try. I never used it straight but mixed it with cardboard, but I plan to do more with it when I start papercreting again. I say if you don't know if something will work just give it a try. Sometimes the new thing works better than the old one.

Sincerely, Judith

Check out my new papercrete blog http://www.papercretebyjudith.com/blog and leave me a comment.

Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith




i'm EMAILING FOR THE GREATER GOOD
Join me



To: papercreters@yahoogroups.com
From: joelincalif@aim.com
Date: Tue, 26 Jan 2010 02:44:43 +0000
Subject: [papercreters] Re: Hammer milled paper?

 
The hammer-milled paper is a by-product of a security firm destroying sensitive papers - like shreding, only much more intense!

What would do with 'paper flour'? It looks as light as flour too.

Would the paper lose it's insulation properties being this fine? I invision it would be like clay when mixed and hard and dense as concrete when dried.

Thanks, Joel

--- In papercreters@yahoogroups.com, D Knott <duknott@...> wrote:
>
> Joel, I like the idea of paper flour. What sort of business has that? (Is it a by-product?) DK
>




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Re: Hammer milled paper?

The hammer-milled paper is a by-product of a security firm destroying sensitive papers - like shreding, only much more intense!

What would do with 'paper flour'? It looks as light as flour too.

Would the paper lose it's insulation properties being this fine? I invision it would be like clay when mixed and hard and dense as concrete when dried.

Thanks, Joel

--- In papercreters@yahoogroups.com, D Knott <duknott@...> wrote:
>
> Joel, I like the idea of paper flour. What sort of business has that? (Is it a by-product?) DK
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [papercreters] Solar Design T-square and clam shaped reflectors




 Why couldn't we use pc for the box part?

Calle


And for the part holding the mirrors.  Thanks for a great science fair project Brian!

Ron



 

I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
That worked like a charm.
Would any of you be willing to try it.
Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
I think cob might be the best material to do a model.
Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
I will not have decent sun here till March. And frankly, the world needs this thing now.

http://solarcooking.wikia.com/wiki/Solar_design_T-Square
Brian White



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Thanks Don for words of experience.



Thanks Don for your words of wisdom.

I think some us being new and not having the same conditions as others have to come up with some different solutions to our problems.

We so appreciate all the work, knowledge, time effort and energy that everyone has taken to teach us and share their experiences.

We have no roads where we are building, so would lose most of our tank of mix. So before we invest all the money time etc we have to weigh our options.

A stationary tow mixer is our only option if they are the best as far as load, strength and less breakdowns are concerned.

We have to have ours built as the distance, the materials and time are huge factors.

When the main guy works 12 hour days and is never home during day light hours and the city code says you can't do something like this, in your yard or driveway, then the next best option has to go into play.
Thanks to so many if you,
Our brains are still trying to soak it all in.
It is so cold and windy here today the birds won't even come out.

For those that want to find more paper free, and other items for your projects. join wwwmFreecycle.com
A place to recycle by gifting what you don't use.
Ask for things or request things that others want to get rid of.

Read the rules carefully.
I belong to a group of around 10,000.


Some great finds, just picked up an almost full box of carpet tac and 4.5 squares of white siding yesterday.

Where is Spring?
Calle


From: Donald Miller <donald1miller@yahoo.com>
Date: Mon, 25 Jan 2010 09:21:01 -0800 (PST)
To: <papercreters@yahoogroups.com>
Subject: [papercreters] Solar Design T-square and clam shaped reflectors

 

I like the solar cooker design setup. I certainly have a lot of solar energy here in SW Arizona. I've been very busy with my seasonal work here and have been just lurking for awhile but I've noticed a lot of newbies to the forum. One word I might put in is don't spend too much time reinventing the wheel. Many of the people on this forum have spent a lot of time with PC and you can learn a lot from them. Also there is no quick fix as far as getting paper, making pulp or putting up walls. If you're afraid to get a little dirt on your hands and to expend some physical energy in the process PC will probably not work well for you. And as for mixers, as Ron Richter says, once you start actually building, even a small structure, you will want more volume and that is where the tow mixer really shines. It takes a tremendous amount of force to pulp paper or cardboard and electric motors or small gas engines will not hold up nearly as well or give you the capacity that  the differential mixer , either towed or stationary will. They are really simple, sturdy and economical to build and use.



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Solar Design T-square and clam shaped reflectors



I like the solar cooker design setup. I certainly have a lot of solar energy here in SW Arizona. I've been very busy with my seasonal work here and have been just lurking for awhile but I've noticed a lot of newbies to the forum. One word I might put in is don't spend too much time reinventing the wheel. Many of the people on this forum have spent a lot of time with PC and you can learn a lot from them. Also there is no quick fix as far as getting paper, making pulp or putting up walls. If you're afraid to get a little dirt on your hands and to expend some physical energy in the process PC will probably not work well for you. And as for mixers, as Ron Richter says, once you start actually building, even a small structure, you will want more volume and that is where the tow mixer really shines. It takes a tremendous amount of force to pulp paper or cardboard and electric motors or small gas engines will not hold up nearly as well or give you the capacity that  the differential mixer , either towed or stationary will. They are really simple, sturdy and economical to build and use.



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Sunday, January 24, 2010

Re: [papercreters] Solar Design T-square and clam shaped reflectors



Will look at this week. We could really use this, this summer while building, as I am the cook and the builder.
So are the directions all here?

Know a lady locally that cooks in a solar box cooker all the time. Why couldn't we use pc for the box part?
Calle


From: "Brian" <gaiatechnician@yahoo.com>
Date: Mon, 25 Jan 2010 01:33:18 -0000
To: <papercreters@yahoogroups.com>
Subject: [papercreters] Solar Design T-square and clam shaped reflectors

 

I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
That worked like a charm.
Would any of you be willing to try it.
Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
I think cob might be the best material to do a model.
Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
I will not have decent sun here till March. And frankly, the world needs this thing now.

http://solarcooking.wikia.com/wiki/Solar_design_T-Square
Brian White



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Solar Design T-square and clam shaped reflectors

I have made a simple tool for designing solar cooking dishes for unattended use. (Parabolic dishes must be attended so the poor cook ends up getting cooked too).
I tried making models with mylar but it did not work so good. Then I tried clay with little mirrors pressed into the wet mud and adjusted.
That worked like a charm.
Would any of you be willing to try it.
Basically the clam shaped reflectors are a whole new type of solar cooker. If you make one, it might be the first or among the first in the world of this type!
I think cob might be the best material to do a model.
Or if you are brave, you can go the whole hog and make a 1 meter fully operational clam shaped solar cook dish.
I will not have decent sun here till March. And frankly, the world needs this thing now.

http://solarcooking.wikia.com/wiki/Solar_design_T-Square
Brian White

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Saturday, January 23, 2010

[papercreters] Hammer milled paper?

Joel, I like the idea of paper flour. What sort of business has that? (Is it a by-product?) DK



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Friday, January 22, 2010

[papercreters] Fire retardant

I was watching an episode of holmes on homes and they were using a green insulation made from old blue jeans that was soaked in a boric acid solution then allowed to dry. They stated that no matter how many times it where to get wet then dry it would never mold and would not catch fire. That termites, mice, rats, roof rats ect. find it an unsuitable living environment and would not every live in this home.

This sounds like a win win for papercreters. Does anyone know or have an educated guess as to what the boric acid solution needs to be to be effective?

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [papercreters] Re: Just a little tidbit of information



Sounds good Bob.  I would make sure neither of the holders is sleepy or distractable.  It could get exciting otherwise. 
I too, am planning my second towmixer being a stationary one.  If set up right near (or in) the construction site then a trash pump can get it to the proper portion of the wall where it is needed.  My first one died near the end of last summer and over the Christmas break I disassembled it to find bearings shot and the bowl full of oil and water.  Must have had a leaky seal at the top of the column over the last 3 years of use.
Ron



From: countryatheartok <criswells.ok@sbcglobal.net>
To: papercreters@yahoogroups.com
Sent: Fri, January 22, 2010 5:02:06 PM
Subject: [papercreters] Re: Just a little tidbit of information

 

Ron I just bought the Two Man Auger shown below. I'm going to mount it over a 200 Gal Water Tank, on two rails that will allow me to move the auger from side to side or lock in the center. I may use the auger and I may just install a shaft with a chopper blade on the bottom or a series of chopper blades up and down the shaft. I'm going to mount the tank on a two wheel trailer made from the front axle of a Old Dodge Pick-up truck. I'll be able to move it from place to place without the need to pull it around to pulp paper.  I probably will not mix papercrete in it at all, I'll just use it to pulp paper and cardboard, then dump or dip the pulp onto a screen and catch the water and reuse as much as possible. I'll then put the wet drained pulp into my mixer and add cement while mixing, after a time I'll add clay or clay and sand.

Two Man Auger


--- In papercreters@ yahoogroups. com, Ron Richter <ronerichter@ ...> wrote:

 Bob,
 Even though I don't shred my paper I do the same thing. In the kitchen are 2 trash cans one for NOT PAPER the other for PAPER. In the paper bin one will find discarded flyers, magazines, old books, egg cartons, and any soft paper (paper towels, tissues). Out in the woodshed is the box depository and newspaper. There also, is where the neighbors drop off prize bundles of newspaper or catalogs and such. 
I cut all glued magazine backs off on the bandsaw (National Geographic (have staples too) and big catalogs) because they will wrap around the leading edge of the blade and reduce the effective cutting power. When this happens in a tow mixer you have to back up frequently, but they still wrap up the leading edge of the blade.
 Ron
 
>
>
>
> ____________ _________ _________ __
> Bob Wrote: Would like to know if anyone else has though of using this hodge podge of recyclable goods.
> BTB
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] Re: Just a little tidbit of information



This is a superb idea.  I can see this setup more friendly in some situations due to portability, but I especially like the idea about draining the wet pulp and mixing it with cement.  I am thinking this would allow for faster forms, which translates to being done more quickly with your project.



On Fri, Jan 22, 2010 at 6:02 PM, countryatheartok <criswells.ok@sbcglobal.net> wrote:
 

Ron I just bought the Two Man Auger shown below. I'm going to mount it over a 200 Gal Water Tank, on two rails that will allow me to move the auger from side to side or lock in the center. I may use the auger and I may just install a shaft with a chopper blade on the bottom or a series of chopper blades up and down the shaft. I'm going to mount the tank on a two wheel trailer made from the front axle of a Old Dodge Pick-up truck. I'll be able to move it from place to place without the need to pull it around to pulp paper.  I probably will not mix papercrete in it at all, I'll just use it to pulp paper and cardboard, then dump or dip the pulp onto a screen and catch the water and reuse as much as possible. I'll then put the wet drained pulp into my mixer and add cement while mixing, after a time I'll add clay or clay and sand.


--- In papercreters@yahoogroups.com, Ron Richter <ronerichter@...> wrote:

 Bob,
 Even though I don't shred my paper I do the same thing. In the kitchen are 2 trash cans one for NOT PAPER the other for PAPER. In the paper bin one will find discarded flyers, magazines, old books, egg cartons, and any soft paper (paper towels, tissues). Out in the woodshed is the box depository and newspaper. There also, is where the neighbors drop off prize bundles of newspaper or catalogs and such. 
I cut all glued magazine backs off on the bandsaw (National Geographic (have staples too) and big catalogs) because they will wrap around the leading edge of the blade and reduce the effective cutting power. When this happens in a tow mixer you have to back up frequently, but they still wrap up the leading edge of the blade.
 Ron
 



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Re: Just a little tidbit of information



Ron I just bought the Two Man Auger shown below. I'm going to mount it over a 200 Gal Water Tank, on two rails that will allow me to move the auger from side to side or lock in the center. I may use the auger and I may just install a shaft with a chopper blade on the bottom or a series of chopper blades up and down the shaft. I'm going to mount the tank on a two wheel trailer made from the front axle of a Old Dodge Pick-up truck. I'll be able to move it from place to place without the need to pull it around to pulp paper.  I probably will not mix papercrete in it at all, I'll just use it to pulp paper and cardboard, then dump or dip the pulp onto a screen and catch the water and reuse as much as possible. I'll then put the wet drained pulp into my mixer and add cement while mixing, after a time I'll add clay or clay and sand.

Two Man Auger


--- In papercreters@yahoogroups.com, Ron Richter <ronerichter@...> wrote:

 Bob,
 Even though I don't shred my paper I do the same thing. In the kitchen are 2 trash cans one for NOT PAPER the other for PAPER. In the paper bin one will find discarded flyers, magazines, old books, egg cartons, and any soft paper (paper towels, tissues). Out in the woodshed is the box depository and newspaper. There also, is where the neighbors drop off prize bundles of newspaper or catalogs and such. 
I cut all glued magazine backs off on the bandsaw (National Geographic (have staples too) and big catalogs) because they will wrap around the leading edge of the blade and reduce the effective cutting power. When this happens in a tow mixer you have to back up frequently, but they still wrap up the leading edge of the blade.
 Ron
 
>
>
>
> ________________________________
> Bob Wrote: Would like to know if anyone else has though of using this hodge podge of recyclable goods.
> BTB
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] Just a little tidbit of information



Bob,
Even though I don't shred my paper I do the same thing.  In the kitchen are 2 trash cans one for NOT PAPER the other for PAPER.  In the paper bin one will find discarded flyers, magazines, old books, egg cartons, and any soft paper (paper towels, tissues).  Out in the woodshed is the box depository and newspaper.  There also, is where the neighbors drop off prize  bundles of newspaper or catalogs and such. 
I cut all glued magazine backs off on the bandsaw (National Geographic (have staples too) and big catalogs) because they will wrap around the leading edge of the blade and reduce the effective cutting power.  When this happens in a tow mixer you have to back up frequently, but they still wrap up the leading edge of the blade.
Ron


Bob Wrote:
Would like to know if anyone else has though of using this hodge podge of  recyclable goods.

BTB



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Re: Just a little tidbit of information



I don't have a towmixer (nor do I want one) but I can shred in all kinds of weather (12" snow on the ground comes to mind) any time of day or night, while I'm setting by the fireplace and watching TV. The below is an example of my shredded cardboard. A little bit of water and a short mix (say 2 min max) will produce an oatmeal looking pulp, just add cement, sand or clay or both and your good to go.

cardboard samples006

Three Gals Wet Pulp

pulp after water added and before cement, sand and or clay.


--- In papercreters@yahoogroups.com, "allan.buch" <ab.7470@...> wrote:

 Why do you shred paper? I have build a towmixer and i can put almost anything in it(cardboard boxes and whole newspapers) without shredding it so it seems like a waist of time to shred the paper?
 
About the strength of the papercrete, i would be nice to see some test of pc made from different kind of paper/cardboard.
 



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] What types of paper processing are required

Hello Group,

What types of processes paper work with papercrete? Shredded, torn, hammer milled, ...?

I was under the impression the paper had to be 'torn or pulverized', as done with a tow mixer or something like that, to get the benefit of strength of the fibers. If shredded paper works well then that opens up lots more opportunities for me (I can get shredded paper).

I also have a potential source for hammer milled paper but it looks like they worked it so hard it's now as fine as flour. Can that actually be any good for making lightweight insulating papercrete? Seems the crete would be pretty dense when dried.

I'd like to mold and pre-build the exterior papercrete panels for a geodesic dome.

This is a great group, Thanks in advance, Joel

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Just a little tidbit of information



We don't all have a tow mixer.
 
Marilyn
FREE Animations for your email - by IncrediMail! Click Here!

__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Re: Just a little tidbit of information

Why do you shred paper? I have build a towmixer and i can put almost anything in it(cardboard boxes and whole newspapers) without shredding it so it seems like a waist of time to shred the paper?

About the strength of the papercrete, i would be nice to see some test of pc made from different kind of paper/cardboard.

--- In papercreters@yahoogroups.com, "countryatheartok" <criswells.ok@...> wrote:
>
>
> I'm one of the people in this group that uses a 14 page paper shredder
> to do my shredding with. It really great to be able to shred when the
> weather outside is wet or cold. I've been shredding every tidbit of
> paper or cardboard I can get my hands on. I even shred all my containers
> like cracker boxes, jello boxes, maccoronin boxes, tooth paste
> boxes......etc, paper towel and toliet paper rollers. If it's made from
> paper I shred it. I'm thinking all these hard paper products will add to
> the strength of my papercrete. I've also been shreding those better
> quality paper plates (I wash them after use and when dry I shred them,
> they are extremely tough) Would like to know if anyone else has though
> of using this hodge podge of recyclable goods.
>
> BTB
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [papercreters] Just a little tidbit of information]





A problem with aggregate is clogging of sprayers. Some bales of shredded paper that I bought years ago came with shredded credit cards, cd's, window envelopes, overnight envelopes (tyvec), and a few beer bottles. All of those tend to clog sprayers.

I have thrown all sorts of stuff into my mixer, including bamboo. Styrofoam has to be pre shredded or it just tends to float around on top of the mix, even with lots of agitation. The bamboo was hard to break down. It did shred into long fibers that probably helped reinforce the papercrete, but never turned into anything like pulp.

If I ever get a chain flail built (as soon as it warms up some) then I'm going to be feeding it just about everything that will go down its throat. I don't intend to put too much filler junk into any one mixer load unless it is all good insulation. Junkcrete won't be used for spraying unless I can run it through a sorter/sizer first.

spaceman



Perry Way wrote:
Not me, but I know I read something about adding all kinds of aggregate into the mix.  I am thinking it is here.  Someone is using shredded CD's too.  You might do a search on the archives of this group (online on the website) and you might pull up a message.  Perhaps keyword "shred".

Perry



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Thursday, January 21, 2010

[papercreters] Re: Just a little tidbit of information




--- In papercreters@yahoogroups.com, "countryatheartok" <criswells.ok@...> wrote:

 P.S. I almost forgot, when we go to the grocery store and they say "Paper or Plastic" I always say Paper, those brown paper bags make great Paper Pulp.


 I'm one of the people in this group that uses a 14 page paper shredder
 to do my shredding with. It really great to be able to shred when the
 weather outside is wet or cold. I've been shredding every tidbit of
 paper or cardboard I can get my hands on. I even shred all my containers
 like cracker boxes, jello boxes, maccoronin boxes, tooth paste
 boxes......etc, paper towel and toliet paper rollers. If it's made from
 paper I shred it. I'm thinking all these hard paper products will add to
 the strength of my papercrete. I've also been shreding those better
 quality paper plates (I wash them after use and when dry I shred them,
 they are extremely tough) Would like to know if anyone else has though
 of using this hodge podge of recyclable goods.
 
BTB



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] Just a little tidbit of information



Not me, but I know I read something about adding all kinds of aggregate into the mix.  I am thinking it is here.  Someone is using shredded CD's too.  You might do a search on the archives of this group (online on the website) and you might pull up a message.  Perhaps keyword "shred".


Perry

On Thu, Jan 21, 2010 at 4:58 PM, countryatheartok <criswells.ok@sbcglobal.net> wrote:
 

I'm one of the people in this group that uses a 14 page paper shredder to do my shredding with. It really great to be able to shred when the weather outside is wet or cold. I've been shredding every tidbit of paper or cardboard I can get my hands on. I even shred all my containers like cracker boxes, jello boxes, maccoronin boxes, tooth paste boxes......etc, paper towel and toliet paper rollers. If it's made from paper I shred it. I'm thinking all these hard paper products will add to the strength of my papercrete. I've also been shreding those better quality paper plates (I wash them after use and when dry I shred them, they are extremely tough) Would like to know if anyone else has though of using this hodge podge of  recyclable goods.

BTB

__.


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

RE: [papercreters] Just a little tidbit of information



I hadn't thought of it before but I will now. Thanks.

PS I like it when  a bit of the original message (or better, the entire message) is left so I can follow the thread. I don't read each and every email I get but if I see something that catches my interest I will read it.
Having the original thought helps a lot. I know there are those who have the opposite feeling about this but this is my viewpoint.
Sincerely, Judith

Check out my new papercrete blog http://www.papercretebyjudith.com/blog and leave me a comment.

Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith




i'm EMAILING FOR THE GREATER GOOD
Join me



To: papercreters@yahoogroups.com
From: criswells.ok@sbcglobal.net
Date: Fri, 22 Jan 2010 00:58:27 +0000
Subject: [papercreters] Just a little tidbit of information

 

I'm one of the people in this group that uses a 14 page paper shredder to do my shredding with. It really great to be able to shred when the weather outside is wet or cold. I've been shredding every tidbit of paper or cardboard I can get my hands on. I even shred all my containers like cracker boxes, jello boxes, maccoronin boxes, tooth paste boxes......etc, paper towel and toliet paper rollers. If it's made from paper I shred it. I'm thinking all these hard paper products will add to the strength of my papercrete. I've also been shreding those better quality paper plates (I wash them after use and when dry I shred them, they are extremely tough) Would like to know if anyone else has though of using this hodge podge of  recyclable goods.
BTB



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___