Friday, May 16, 2008

[papercreters] Re: 55 gallon mixer

the problem with many of these mixers is that either they are
meatbeaters with a lot of torque , which creates a lot of vibration,
or they are high speed , with blades without much pitch, so that they
pulp well and cannot throw the heavy's - My suggestion is a 5 horse
power electric motor 220 volt at 1750 rpm with a balance shaft mounted
with a dozen 60 tooth table saw blades- this will rip the cr** out of
the paper and create a involute / vortex which will suck in the heavy
portland - you will have to put a lot of energy into the mixing one
way or the other - I use a 3.44yard roll mixer and hammer-milled
newsprint from International cellulose in Houston (for bricks ) For
plaster I use an Imer horizontal paddle blade mixer- Clyde--- In
papercreters@yahoogroups.com, "Ernie Phelps" <eepjr24@...> wrote:
>
> --- In papercreters@yahoogroups.com, "larystoy" <larystoy@> wrote:
> >
> > Need information on building a stationary 55 gallon mixer.
> >
> > I will be using an old Cushman rear axle to build the mixer with.
> >
> > Questions are:
> >
> > 1. Will a 10 HP gas motor be strong enough to drive it?
> >
> > 2. At what RPM should the mixer blade turn?
> > There is a 2 1/2 to 1 ratio in the axle.
> > (ie - wheel turns 1 time, axle turns 2 1/2 times)
>
> Hi Larry. I suggest you take a good read through the archives. Here is
> a good post to start with (links other posts):
>
> http://groups.yahoo.com/group/papercreters/message/2507
>
> No one on the list is likely to have exact answers for your particular
> situation, since there are many many variables involved (specs of the
> motor, specs of the axle, type of blade, how blade is mounted, size of
> drum, voltage and amperage of power available, thickness / content of
> desired mix, etc). Not trying to discourage you, just the opposite.
> You will find alot of this information with a few simple experiments,
> if you let some previous posters experience guide you on the basic
> safety and other guidelines.
>
> - Ernie
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/papercreters/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/